Kædetråd / jewelry wire

The other day i was at a store in Sønderborg called Stoff 2000.

I found Kædetråd / jewelry wire there diameter is 0.8 mm, length is 6m of silver plated wire. I had to buyone of these and test soldered on it yesterday,it solders like a charm.

The product which i bought is called:

Gütermann creativ (Art. 665827)

EAN: 4008015641894

It is made by Gütermann AG

At the price of 19.95 DKK which is less than 4USD is find it a cheap birdnest (Fuglerede in danish) / manhattan / deadbug component.

Morse code lesson 4 completede without errors!

Just did lesson 4 and completed without any mistakes!

New house / home / QTH

It seems like that the proces of owning a house is going forward. Was at our lawyer today and it seems the the estate has accepted our offer

Morse code practice this evening

Well could not get the swing of it this evening. Though i got most, far from all. But what i copied mostly showed i / s errors. the rest "EITNAMO" is fine

Morse code practice goes on

Just got my few minues of training in this morning:

I use these lectures: Le lezioni di Telegrafia di MARIO IK2YRT

I do copy more and more correct. Though I do NEED lots of more practice before being able to be let loose in CW mode.

Morse code practice is going slow

Well my intention started out great, though having a family of 5, where the youngest is little over a year, does not permit many time slots to practise.

Family first though then code practise.

Still trying to get loans for the new qth/house

We are still in the process of gettlng the loans into place.

TS-120S has been fixed (I hope)

After adding SB mods to it, it has become little better though still not usefull.

Then today I removed the top cover, loosened the screws holding the RF unit and the relay above it, then tightned them all again.

Next was alittle wiggling of all connectors in the ares of the relay board.

Now it seems to work without any problems in all bands and all modes (that it can)

Thanks to Eric, KM4ZL from the kenwoodts120_130 group at yahoo

In heinseit the RF unit board's screws was a tad bit loos. I exercised the band selecter when i was at it.

VLF antenna

This my vlf antenna, yes it is a deguass coil from an old tv, an tl-074 as instrument amp and BPF ~400 Hz - ~100 KHz



Above is the instrument amplifier and BPF.



The thin black line is a demagnitising coil from an old TV, the picture is taking looking straight south

A picture of me

Here is a picture of me taking a picture with "my" Canon EOS400 with an 18-55 f/2.8 Tamron lens.

The vertical Al rod in the background is my current QRSs antenna for 10140075Hz.

[caption id="attachment_54" align="alignnone" width="800" caption="Me with "my" Canon eos400"][/caption]

Click here to enter your link in the blog hop and view the entire list of entered links...

Portable vertical antenna

This is fast throw together loaded antenna.

TDB: test it!